6 inch VMI Horizontal Dredge1
来源:百度文库 编辑:神马文学网 时间:2024/07/07 14:58:48
Dredges and Dredging Equipment
![](http://image6.360doc.cn/DownloadImg/2009/12/1616/2011640_1.jpg)
Hydraulic Dredges
Cargo Barges
Dredge Components
Mechanical Dredges
Work & Crane Barges
Pipeline Components
Hopper Dredges
Work Boats
Support Equipment
![](http://image6.360doc.cn/DownloadImg/2009/12/1616/2011640_3.jpg)
![](http://image6.360doc.cn/DownloadImg/2009/12/1616/2011640_4.jpg)
![](http://image6.360doc.cn/DownloadImg/2009/12/1616/2011640_5.jpg)
![](http://image6.360doc.cn/DownloadImg/2009/12/1616/2011640_6.jpg)
![](http://image6.360doc.cn/DownloadImg/2009/12/1616/2011640_7.jpg)
![](http://www.dredgebrokers.com/images/tools.jpg)
![](http://image6.360doc.cn/DownloadImg/2009/12/1616/2011640_8.jpg)
![](http://image6.360doc.cn/DownloadImg/2009/12/1616/2011640_9.jpg)
File 90806-DH
![](http://image6.360doc.cn/DownloadImg/2009/12/1616/2011640_10.jpg)
More Photos
6 inch VMI Horizontal Dredge
This 6 inch VMI Horizontal Dredge is a Model # MD-615 HC.
Located in The State of New Jersey, USA
Price for Dredge: USD $ 105,000
Technical Details Principal Dimensions and Characteristics
Length Over All: 11.43 m
38 feet
Height: (without A/C) 2.59 m
8 feet
Width: (Transport) 2.74 m 9 feet
Weight: (approx.) 10,400 kg
23,000 lbs
Draft: 558.8 mm 22 inches
Fuel capacity: 923 liters
244 gallons
Main Engine
Make/Model: Cummins / QSB 8.3
Power @ 2,200 RPM 194 kW 260 hp
Pump
Make/Model: Hi-chrome cast iron, centrifugal, recessed impeller
Impeller: 558.8 m 22 inches
Suction: 152.4 mm 6 inches
Discharge: 152.4 mm 6 inches
Capacity: (water @ 68 degrees F 5.75" (146 mm) sphere - Variable to 2,000 GPM (7,570 L/min) @ 140' (42.7 m) head @ 1,140 RPM
Cutter Assembly
Type: Horizontal with full-width, flow-through suction (Paddle and cutting teeth available)
Size: 9 feet wide x 21 inches diameter 2.74 m wide x 533.4 mm diameter
Speed: Variable 0-80 RPM (forward and reverse)
Torque: 56,000 lbs (6,328 N.m)
Operating Depth: Variable tp 15' (4.57 m) mximum
Pontoons (2)
Dimensions: ( 2) Two - 32" (812.8 mm) x 34" (863.6 mm) x 33' 6" (10.21 m)
Description:
10 gauge steel, integral bulkheads and stiffeners, formed for rigidity,
cora-foam filled
Propulsion
Type: Treble sheave hydraulic winch
Traverse speed: Variable 0-5 ft/min (0-15.2 m/min)
Cutting speed: 0-15 ft/min (0-4.57 m/min)
Hydraulic System
Pumps: Variable displacement, axial piston
Motors: Fixed displacement
Capacity: Total, 130 GPM (492.1 L/min) @ 2,220 RPM
Reservoir: 378.5 liters 100 gallons
Drive
Type: Hydraulic pump drive, direct from engine
Filters
Type: protected hydrostatic loop, high pressure suction & return
Relief Settings
Centrifugal Pump: 4,000 psi (276 bar)
Cutter Head: 3,000 psi (207 bar)
Accessories: 3,000 psi (207 bar)
Boom: 1,500 psi (103 bar)
Electrical System
Alternator: Output - 100 amp
Battery: Heavy Duty - 12 volt
Prime Finish
Lower Structure Shear Tar Epoxy Paint
Upper Structure Blue and White Epoxy paint
All details on these pages are given in good faith and are believed to be accurate but no warranty of accuracy or completeness or suitability for purpose is either stated or implied. Prices are subject to change without notice.
Si usted prefiere hablar español, contacte por favor a Wilhelm von Mayer aqui. Für kontakt auf Deutsch, bitte melden Sie sich mit Herr Wilhelm von Mayerhier. List Your Equipment for Free.
![](http://image6.360doc.cn/DownloadImg/2009/12/1616/2011640_11.gif)
DredgeBrokers © 2007
Dredge Brokers Design bythewritersforhire.com
![](http://image6.360doc.cn/DownloadImg/2009/12/1616/2011640_1.jpg)
![](http://image6.360doc.cn/DownloadImg/2009/12/1616/2011640_2.gif)
![](http://image6.360doc.cn/DownloadImg/2009/12/1616/2011640_2.gif)
![](http://image6.360doc.cn/DownloadImg/2009/12/1616/2011640_2.gif)
![](http://image6.360doc.cn/DownloadImg/2009/12/1616/2011640_2.gif)
![](http://image6.360doc.cn/DownloadImg/2009/12/1616/2011640_2.gif)
![](http://image6.360doc.cn/DownloadImg/2009/12/1616/2011640_2.gif)
![](http://image6.360doc.cn/DownloadImg/2009/12/1616/2011640_2.gif)
![](http://image6.360doc.cn/DownloadImg/2009/12/1616/2011640_2.gif)
![](http://image6.360doc.cn/DownloadImg/2009/12/1616/2011640_2.gif)
![](http://image6.360doc.cn/DownloadImg/2009/12/1616/2011640_3.jpg)
![](http://image6.360doc.cn/DownloadImg/2009/12/1616/2011640_4.jpg)
![](http://image6.360doc.cn/DownloadImg/2009/12/1616/2011640_5.jpg)
![](http://image6.360doc.cn/DownloadImg/2009/12/1616/2011640_6.jpg)
![](http://image6.360doc.cn/DownloadImg/2009/12/1616/2011640_7.jpg)
![](http://www.dredgebrokers.com/images/tools.jpg)
![](http://image6.360doc.cn/DownloadImg/2009/12/1616/2011640_8.jpg)
![](http://image6.360doc.cn/DownloadImg/2009/12/1616/2011640_9.jpg)
File 90806-DH
![](http://image6.360doc.cn/DownloadImg/2009/12/1616/2011640_10.jpg)
More Photos
6 inch VMI Horizontal Dredge
This 6 inch VMI Horizontal Dredge is a Model # MD-615 HC.
Located in The State of New Jersey, USA
Price for Dredge: USD $ 105,000
Technical Details Principal Dimensions and Characteristics
Length Over All: 11.43 m
38 feet
Height: (without A/C) 2.59 m
8 feet
Width: (Transport) 2.74 m 9 feet
Weight: (approx.) 10,400 kg
23,000 lbs
Draft: 558.8 mm 22 inches
Fuel capacity: 923 liters
244 gallons
Main Engine
Make/Model: Cummins / QSB 8.3
Power @ 2,200 RPM 194 kW 260 hp
Pump
Make/Model: Hi-chrome cast iron, centrifugal, recessed impeller
Impeller: 558.8 m 22 inches
Suction: 152.4 mm 6 inches
Discharge: 152.4 mm 6 inches
Capacity: (water @ 68 degrees F 5.75" (146 mm) sphere - Variable to 2,000 GPM (7,570 L/min) @ 140' (42.7 m) head @ 1,140 RPM
Cutter Assembly
Type: Horizontal with full-width, flow-through suction (Paddle and cutting teeth available)
Size: 9 feet wide x 21 inches diameter 2.74 m wide x 533.4 mm diameter
Speed: Variable 0-80 RPM (forward and reverse)
Torque: 56,000 lbs (6,328 N.m)
Operating Depth: Variable tp 15' (4.57 m) mximum
Pontoons (2)
Dimensions: ( 2) Two - 32" (812.8 mm) x 34" (863.6 mm) x 33' 6" (10.21 m)
Description:
10 gauge steel, integral bulkheads and stiffeners, formed for rigidity,
cora-foam filled
Propulsion
Type: Treble sheave hydraulic winch
Traverse speed: Variable 0-5 ft/min (0-15.2 m/min)
Cutting speed: 0-15 ft/min (0-4.57 m/min)
Hydraulic System
Pumps: Variable displacement, axial piston
Motors: Fixed displacement
Capacity: Total, 130 GPM (492.1 L/min) @ 2,220 RPM
Reservoir: 378.5 liters 100 gallons
Drive
Type: Hydraulic pump drive, direct from engine
Filters
Type: protected hydrostatic loop, high pressure suction & return
Relief Settings
Centrifugal Pump: 4,000 psi (276 bar)
Cutter Head: 3,000 psi (207 bar)
Accessories: 3,000 psi (207 bar)
Boom: 1,500 psi (103 bar)
Electrical System
Alternator: Output - 100 amp
Battery: Heavy Duty - 12 volt
Prime Finish
Lower Structure Shear Tar Epoxy Paint
Upper Structure Blue and White Epoxy paint
All details on these pages are given in good faith and are believed to be accurate but no warranty of accuracy or completeness or suitability for purpose is either stated or implied. Prices are subject to change without notice.
Si usted prefiere hablar español, contacte por favor a Wilhelm von Mayer aqui. Für kontakt auf Deutsch, bitte melden Sie sich mit Herr Wilhelm von Mayerhier. List Your Equipment for Free.
![](http://image6.360doc.cn/DownloadImg/2009/12/1616/2011640_11.gif)
DredgeBrokers © 2007
Dredge Brokers Design bythewritersforhire.com
6 inch VMI Horizontal Dredge1
6 inch VMI Horizontal Dredge
VMI管理
12 inch
Drawing horizontal and vertical gridlines
12 inch Dredger
12 inch Dredger1
Closer - Nine Inch Nails
3 inch Crisafulli Flump Dredge
18 inch Cutter Suction Dredger
18 inch Cutter suction dredger2
24 inch Electric Cutter Dredge
18 inch Cutter Suction Dredger1
14 inch (356 mm) Swinging Ladder?Dredge
8 inch H&H Auger Suction Dredge
VMI管理在海尔的应用 - 诺达家园
VMI管理在海尔的应用 - 诺达家园1
Sharp Microelectronics Europe introduces 7.5-inch LCD panel
I read somewhere that every inch of rope
HDD vendors to offer low-cost 2.5-inch HDDs for netbooks in 2009, say Taiwan makers
(6)
****6
成语故事(6)6
西游记6