解析网卡配置静态Ubuntu IP地址 - 51CTO.COM
来源:百度文库 编辑:神马文学网 时间:2024/10/04 03:43:28
Ubuntu IP经过长时间的发展,这里我发表一下个人理解,下面就这就来讲术Ubuntu IP地址。在单位的一台机器完全装了Ubuntu Server,但回家只能在XP上VM一个,装的时候网卡是DHCP的,用ifconfig查了一下Ubuntu IP地址是192.168.92.128,可以ping通。
转载不是错:
Ubuntu IP地址命令行修改网络配置方法/etc/network/interfaces
打开后里面可设置DHCP或手动设置静态ip。前面auto eth0,让网卡开机自动挂载.
1. 以DHCP方式配置网卡
编辑文件/etc/network/interfaces:
sudo vi /etc/network/interfaces
并用下面的行来替换有关eth0的行:
# The primary network interface - use DHCP to find our address
auto eth0
iface eth0 inet dhcp
用下面的命令使网络设置生效:
sudo /etc/init.d/networking restart
也可以在命令行下直接输入下面的命令来获取地址sudo dhclient eth0
2. 为网卡配置静态Ubuntu IP地址
编辑文件/etc/network/interfaces:sudo vi /etc/network/interfaces
并用下面的行来替换有关eth0的行:# The primary network interface
auto eth0
iface eth0 inet static
address 192.168.3.90
gateway 192.168.3.1
netmask 255.255.255.0
#network 192.168.3.0
#broadcast 192.168.3.255
将上面的Ubuntu IP地址地址等信息换成你自己就可以了.用下面的命令使网络设置生效:sudo /etc/init.d/networking restart
3. 设定第二个Ubuntu IP地址(虚拟IP地址)
编辑文件/etc/network/interfaces:sudo vi /etc/network/interfaces
在该文件中添加如下的行:
auto eth0:1
iface eth0:1 inet static
address 192.168.1.60
netmask 255.255.255.0
network x.x.x.x
broadcast x.x.x.x
gateway x.x.x.x
根据你的情况填上所有诸如address,netmask,network,broadcast和gateways等信息.
用下面的命令使网络设置生效:sudo /etc/init.d/networking restart
4. 设置主机名称(hostname)
使用下面的命令来查看当前主机的主机名称:sudo /bin/hostname
使用下面的命令来设置当前主机的主机名称:sudo /bin/hostname newname
系统启动时,它会从/etc/hostname来读取主机的名称.关于设置主机名称的更多信息,请访问这里
5. 配置DNS
首先,你可以在/etc/hosts中加入一些主机名称和这些主机名称对应的Ubuntu IP地址,这是简单使用本机的静态查询.要访问DNS 服务器来进行查询,需要设置/etc/resolv.conf文件.假设DNS服务器的Ubuntu IP地址是192.168.3.2, 那么/etc/resolv.conf文件的内容应为:search test.com
转载不是错:
Ubuntu IP地址命令行修改网络配置方法/etc/network/interfaces
打开后里面可设置DHCP或手动设置静态ip。前面auto eth0,让网卡开机自动挂载.
1. 以DHCP方式配置网卡
编辑文件/etc/network/interfaces:
sudo vi /etc/network/interfaces
并用下面的行来替换有关eth0的行:
# The primary network interface - use DHCP to find our address
auto eth0
iface eth0 inet dhcp
用下面的命令使网络设置生效:
sudo /etc/init.d/networking restart
也可以在命令行下直接输入下面的命令来获取地址sudo dhclient eth0
2. 为网卡配置静态Ubuntu IP地址
编辑文件/etc/network/interfaces:sudo vi /etc/network/interfaces
并用下面的行来替换有关eth0的行:# The primary network interface
auto eth0
iface eth0 inet static
address 192.168.3.90
gateway 192.168.3.1
netmask 255.255.255.0
#network 192.168.3.0
#broadcast 192.168.3.255
将上面的Ubuntu IP地址地址等信息换成你自己就可以了.用下面的命令使网络设置生效:sudo /etc/init.d/networking restart
3. 设定第二个Ubuntu IP地址(虚拟IP地址)
编辑文件/etc/network/interfaces:sudo vi /etc/network/interfaces
在该文件中添加如下的行:
auto eth0:1
iface eth0:1 inet static
address 192.168.1.60
netmask 255.255.255.0
network x.x.x.x
broadcast x.x.x.x
gateway x.x.x.x
根据你的情况填上所有诸如address,netmask,network,broadcast和gateways等信息.
用下面的命令使网络设置生效:sudo /etc/init.d/networking restart
4. 设置主机名称(hostname)
使用下面的命令来查看当前主机的主机名称:sudo /bin/hostname
使用下面的命令来设置当前主机的主机名称:sudo /bin/hostname newname
系统启动时,它会从/etc/hostname来读取主机的名称.关于设置主机名称的更多信息,请访问这里
5. 配置DNS
首先,你可以在/etc/hosts中加入一些主机名称和这些主机名称对应的Ubuntu IP地址,这是简单使用本机的静态查询.要访问DNS 服务器来进行查询,需要设置/etc/resolv.conf文件.假设DNS服务器的Ubuntu IP地址是192.168.3.2, 那么/etc/resolv.conf文件的内容应为:search test.com
解析网卡配置静态Ubuntu IP地址 - 51CTO.COM
Ubuntu Linux配置IP地址使用命令 - 51CTO.COM
浅析C#接口之获取IP地址 - 51CTO.COM
教你解决IP地址被非法修改的麻烦 - 51CTO.COM
linux下静态IP配置
ubuntu 网卡设置,ip,mask,gateway,dns
ubuntu 网卡设置,ip,mask,gateway,dns
一张网卡配置一个以上的ip
简单C# MessageBox的实现解析 - 51CTO.COM
详细解析Linux scp命令的应用 - 51CTO.COM
linux下单网卡设双置IP - 艺飞博客 - 51CTO技术博客-领先的IT技术博客
Ubuntu Linux下笔记本禁用触摸板的方法 - 51CTO.COM
利用Cisco IOS 防止遭受IP地址欺骗攻击.doc - 网络工程 - 51CTO技术...
经典配置包括Catalyst6509 4006交换机配置方案(1) - 51CTO.COM
交换机VLAN接口IP地址配置
手动配置linux的IP地址
网管实战:Linux服务器网卡ip配置攻略
用IP转发和Route路由实现跨网段互访 - 51CTO.COM
Linux操作系统下/etc/hosts文件配置方法 - 51CTO.COM
七大实用命令行工具 玩转Linux网络配置(2) - 51CTO.COM
14.2.4 Cisco SDM安装配置(1) - 51CTO.COM
获取SQL Server元数据的方法与配置 - 51CTO.COM
C#打开Excel文档的两大方法解析 - 51CTO.COM
手动配置linux的IP地址 - Linux - Jming