如何在装有REDHAT系统的电脑上,在另一台电脑上从装有Redhatd 电脑上下载东西下来
来源:百度文库 编辑:神马文学网 时间:2024/06/04 05:53:13
1。本帖操作环境是Redhat 9.0,VSFTPD的版本是Redhat 9.0所带的vsftpd-1.1.3-8.i386.rpm,在安装盘的第三张中2。VSFTPD实现的最基本的目的:用系统中存在的真实用户能登入FTP,能用匿名访问。3。服务器的IP和和DNS设定第一块网卡
IP:192.168.0.1
子掩码:255.255.255.0
网关不设置:
第二块网卡:
IP:192.168.0.2
子掩码:255.255.255.0
网关不设置因为我的操作环境是一个小型的局域网,所以其它的机器的IP都是在192.168.0这个网段上。ADSL是接在服务器的第一个网卡上。服务器的第二个网卡是接集线器,其它的客户机都是接在集线器上。为了能让ADSL访问internet,因为自己手动设置了IP,所以DNS也要自己来设置,DNS如下:202.96.134.133
202.96.168.68设置工具是:[root@linuxsir001 root]# redhat-config-network一。用VSFTP来架设FTP服务器,VSFTP服务器是目前最好的FTP服务器软件,优点是体积小,可定制强,效率高1。查看是否安装了vsftpd软件
[root@linuxsir001 root]# rpm -qa | grep vsftpd
如果没有任何显示,说明没有把vsftpd安装上,如果出现的是下面的这样的提示,就证明已经安装上了。[root@linuxsir001 root]# rpm -qa | grep vsftpd
vsftpd-1.1.3-8我以Redhat 9.0,以其自带的vsftpd包vsftpd-1.1.3-8版本来为本帖约定。[root@linuxsir001 root]# rpm -ivh vsftpd*.rpm 2。打开VSFTP服务器。[root@linuxsir001 root]# ntsysv把vsftpd服务器打开,也就是在运行 ntsysv命令后,把vsftpd服务选中。
vsftpd 3。运行/etc/init.d/vsftpd start[root@linuxsir001 root]# /etc/init.d/vsftpd start
为 vsftpd 启动 vsftpd: [ 确定 ]
[root@linuxsir001 root]#4。配制VSFTP,FVSFTP的运行有两种模式,一种是stardard "initd模式,另外一种是xinetd模式,上面我们所说的就是stardard initd运行模式。两种模式运行机制不是相同的,stardard initd模式,适合专业FTP,且FTP总是一直有人访问,占用资源也是比较大,如果您的FTP总是有人访问和登入。就要用这种模式。如果您的FTP访问人数比较小,建议您用xinetd模式。xinetd模式,是当用户请求时,vsftpd才会启动。不同的环境,当然得用不同的启动模式。如果想了解更多的,请在本帖后面跟帖,我会慢慢补充xinetd模式,以及虚拟用户如何设置方面的问题。
1]我们主要把vsftp的配制文件改一下就行了。配制文件在/etc/vsftpd/vsftpd.conf,用您喜欢的编辑器打开。请参考下面的配制文件。
# Example config file /etc/vsftpd.conf
#
# The default compiled in settings are very paranoid. This sample file
# loosens things up a bit, to make the ftp daemon more usable.
#
# Allow anonymous FTP?
anonymous_enable=YES
#
# Uncomment this to allow local users to log in.
local_enable=YES
#
# Uncomment this to enable any form of FTP write command.
write_enable=YES
#
# Default umask for local users is 077. You may wish to change this to 022,
# if your users expect that (022 is used by most other ftpd's)
local_umask=022
#
# Uncomment this to allow the anonymous FTP user to upload files. This only
# has an effect if the above global write enable is activated. Also, you will
# obviously need to create a directory writable by the FTP user.
#anon_upload_enable=YES
#
# Uncomment this if you want the anonymous FTP user to be able to create
# new directories.
#anon_mkdir_write_enable=YES
#
# Activate directory messages - messages given to remote users when they
# go into a certain directory.
dirmessage_enable=YES
#
# Activate logging of uploads/downloads.
xferlog_enable=YES
#
# Make sure PORT transfer connections originate from port 20 (ftp-data).
connect_from_port_20=YES
#
# If you want, you can arrange for uploaded anonymous files to be owned by
# a different user. Note! Using "root" for uploaded files is not
# recommended!
#chown_uploads=YES
#chown_username=whoever
#
# You may override where the log file goes if you like. The default is shown
# below.
#xferlog_file=/var/log/vsftpd.log
#
# If you want, you can have your log file in standard ftpd xferlog format
xferlog_std_format=YES
#
# You may change the default value for timing out an idle session.
#idle_session_timeout=600
#
# You may change the default value for timing out a data connection.
#data_connection_timeout=120
#
# It is recommended that you define on your system a unique user which the
# ftp server can use as a totally isolated and unprivileged user.
#nopriv_user=ftpsecure
#
# Enable this and the server will recognise asynchronous ABOR requests. Not
# recommended for security (the code is non-trivial). Not enabling it,
# however, may confuse older FTP clients.
#async_abor_enable=YES
#
# By default the server will pretend to allow ASCII mode but in fact ignore
# the request. Turn on the below options to have the server actually do ASCII
# mangling on files when in ASCII mode.
# Beware that turning on ascii_download_enable enables malicious remote parties
# to consume your I/O resources, by issuing the command "SIZE /big/file" in
# ASCII mode.
# These ASCII options are split into upload and download because you may wish
# to enable ASCII uploads (to prevent uploaded scripts etc. from breaking),
# without the DoS risk of SIZE and ASCII downloads. ASCII mangling should be
# on the client anyway..
#ascii_upload_enable=YES
#ascii_download_enable=YES
#
# You may fully customise the login banner string:
#ftpd_banner=Welcome to blah FTP service.
#
# You may specify a file of disallowed anonymous e-mail addresses. Apparently
# useful for combatting certain DoS attacks.
#deny_email_enable=YES
# (default follows)
#banned_email_file=/etc/vsftpd.banned_emails
#
# You may specify an explicit list of local users to chroot() to their home
# directory. If chroot_local_user is YES, then this list becomes a list of
# users to NOT chroot().
#chroot_list_enable=YES
# (default follows)
#chroot_list_file=/etc/vsftpd.chroot_list
#
# You may activate the "-R" option to the builtin ls. This is disabled by
# default to avoid remote users being able to cause excessive I/O on large
# sites. However, some broken FTP clients such as "ncftp" and "mirror" assume
# the presence of the "-R" option, so there is a strong case for enabling it.
#ls_recurse_enable=YESpam_service_name=vsftpd
userlist_enable=YES
#enable for standalone mode
listen=YES
tcp_wrappers=YES2]更改完配制文件后,我们可以用下面的命令来重启VSFTPD服务器[root@linuxsir001 root]# /etc/init.d/vsftpd restart
关闭 vsftpd: [ 确定 ]
为 vsftpd 启动 vsftpd: [ 确定 ]
[root@linuxsir001 root]#3]以匿名方式来访问测试,在text模式下:注意:在text模式下,要用用户名ftp,密码ftp来访问,这才是在text中匿名访问FTP。看如下的操作:[root@linuxsir001 root]# ftp 192.168.0.1
Connected to 192.168.0.1.
220 (vsFTPd 1.1.3)
530 Please login with USER and PASS.
530 Please login with USER and PASS.
KERBEROS_V4 rejected as an authentication type
Name (192.168.0.1:root): ftp 这里写上ftp
331 Please specify the password.
Password:[这里添写ftp的密码],匿名登入密码也是ftp
230 Login successful. Have fun.
Remote system type is UNIX.
Using binary mode to transfer files.
ftp> ls
227 Entering Passive Mode (192,168,0,1,137,151)
150 Here comes the directory listing.
drwxr-xr-x 6 0 0 4096 May 25 13:54 RedHat90
drwxr-xr-x 2 0 0 4096 Feb 28 19:21 pub
226 Directory send OK.
ftp>
那匿名用户所访问的是哪个目录?是/var/ftp这个目录出现问题的解决:有时出错,是因为没有ftp和nobody用户,所以要在系统中添加这两个用户,一般的情况下,这两个用户在系统中是存在的。看下面的操作。
[root@linuxsir001 root]# adduser ftp
adduser: user ftp exists
[root@linuxsir001 root]# adduser nobody
adduser: user nobody exists从上面的操作中可知ftp和nobody用户是存在的,所以没有必要添加ftp和nobody用户了。如果不存在,一定要添加这两个用户,否则会出现匿名用户不能访问的情况。4]如果要以系统中存在的普通用户登入FTP,也没有什么可以设置的,添加一个用户就行。比如我要添加beinan这个用户,就要用下面的办法[root@linuxsir001 root]# adduser beinan
[root@linuxsir001 root]# passwd beinan
Changing password for user beinan.
New password:
BAD PASSWORD: it does not contain enough DIFFERENT characters
Retype new password:
passwd: all authentication tokens updated successfully.
[root@linuxsir001 root]#这样的话,就在/home目录中出现一个beinan的用户目录:如下:[root@linuxsir001 root]# ls /home/
beinan
如果我们想让beinan这个用户作为虚拟用户,也就是说,beinan这个用户是不能登入系统的,只能是登入FTP。 那这样的用户应该如何添加呢??[root@linuxsir001 backupNow]# adduser -g ftp -s /sbin/nologin beinan
[root@linuxsir001 backupNow]# passwd beinan
Changing password for user beinan.
New password:
Retype new password:
passwd: all authentication tokens updated successfully.
[root@linuxsir001 backupNow]#注:这仅仅是VSFTP添加虚拟用户的一个方法,还有更好的办法需要我们去学习!另外的办法也在测试之中。严格上来说,这种办法不能算虚拟用户。还有另外的一个办法,就是通过pam认证,用db_load来添加用户,目前我也弄成功了,不过相对要复杂一点。正在测试之中。
如果我们想把用户目录定位到别的目录应该怎么办呢??这个也比较简单,看一下useradd就比较明白了。比如我想添加beinan这个用户,并把目录放在/opt目录中:如下操作:[root@linuxsir001 root]# adduser -d /opt/beinan beinan
[root@linuxsir001 root]# passwd beinan
Changing password for user beinan.
New password:
Retype new password:
passwd: all authentication tokens updated successfully.如果是添加虚拟用户,也就是不让用户登入系统,只能登入FTP的用户。如果我们想把beinan这个用户目录定位在/opt/beinan这个目录中,根据上面的方法。我们应该如下操作
[root@linuxsir001 backupNow]# adduser -d /opt/beinan -g ftp -s /sbin/nologin beinan
[root@linuxsir001 backupNow]# passwd beinan
Changing password for user beinan.
New password:
Retype new password:
passwd: all authentication tokens updated successfully.
[root@linuxsir001 backupNow]#看一下是不是已经成功添加到了beinan这个用户,并把beinan的家目录放在了/opt目录中呢??[root@linuxsir001 root]# ls /opt/
beinan证明已经成功。我们可以在text模式下以beinan用户登入,然后来访问ftp。[root@linuxsir001 root]# ftp 192.168.0.1
Connected to 192.168.0.1.
220 (vsFTPd 1.1.3)
530 Please login with USER and PASS.
530 Please login with USER and PASS.
KERBEROS_V4 rejected as an authentication type
Name (192.168.0.1:root): beinan
331 Please specify the password.
Password:
230 Login successful. Have fun.
Remote system type is UNIX.
Using binary mode to transfer files.
ftp>是不是成功了???如何把用户限制在家目录中呢??我们要自己建一个文件,在/etc目录中
#touch /etc/vsftpd.chroot_list
以beinan这个用户为例在vsftpd.chroot_list这个文件中,把beinan添上去就行。然后改/etc/vsftpd/vsftpd.conf文件,找如下的两行#chroot_list_enable=YES
#chroot_list_file=/etc/vsftpd.chroot_list把前面的#号去掉,也就是这样的
chroot_list_enable=YES
chroot_list_file=/etc/vsftpd.chroot_list如果没有这样的两行,就可以自己添加上去也是一样的。设置好后,重新vsFTPD服务器。[root@linuxsir001 root]# /etc/init.d/vsftpd restart
关闭 vsftpd: [ 确定 ]
为 vsftpd 启动 vsftpd: [ 确定 ]
[root@linuxsir001 root]#
我们也可以用gftp来访问beinan用户,并上传相应的东西,所传上的东西就放在beinan用户所在的家目录中,普通用户的家目录在哪里,写您所用的添加用户的方法有关。我在前面已经说了两种办法,一种是默认的添加方法,就是放在/home目录中。在本例中,我是采用默认的添加用户的方法。也就是不特别指定用户用户,这样的话,用户目录就在/home目录中。比如用beinan登入FTP时,访问的就是/home/beinan这个目录。让传的东西也在这个目录中。那匿名用户所访问的是哪个目录呢???应该是:/var/ftp这个目录
5]访问ftp的几种方法第一种方法就是text访问,也就是用ftp命令来访问。这个前面已经说过了。第二种方法是以客户端FTP软件来访问,在linux中有gftp。在本例中,我的FTP地址是通过局域网访问的。地址栏中,添上192.168.0.1,端口是21,用户名和密码的添写,如果您是用匿名登入,请不要添写用户名和密码。如果用普通用户登入,这个是必须要用用户名和密码的。第三种办法是和浏览器访问:如果匿名登入,就直接用下面的方法:
ftp://192.168.0.1
如果是用户登入方式,应该是
ftp://beinan@192.168.0.1本文来自: IXPUB技术社区(www.ixpub.net) 详细出处参考:http://www.ixpub.net/thread-392054-1-1.html
IP:192.168.0.1
子掩码:255.255.255.0
网关不设置:
第二块网卡:
IP:192.168.0.2
子掩码:255.255.255.0
网关不设置因为我的操作环境是一个小型的局域网,所以其它的机器的IP都是在192.168.0这个网段上。ADSL是接在服务器的第一个网卡上。服务器的第二个网卡是接集线器,其它的客户机都是接在集线器上。为了能让ADSL访问internet,因为自己手动设置了IP,所以DNS也要自己来设置,DNS如下:202.96.134.133
202.96.168.68设置工具是:[root@linuxsir001 root]# redhat-config-network一。用VSFTP来架设FTP服务器,VSFTP服务器是目前最好的FTP服务器软件,优点是体积小,可定制强,效率高1。查看是否安装了vsftpd软件
[root@linuxsir001 root]# rpm -qa | grep vsftpd
如果没有任何显示,说明没有把vsftpd安装上,如果出现的是下面的这样的提示,就证明已经安装上了。[root@linuxsir001 root]# rpm -qa | grep vsftpd
vsftpd-1.1.3-8我以Redhat 9.0,以其自带的vsftpd包vsftpd-1.1.3-8版本来为本帖约定。[root@linuxsir001 root]# rpm -ivh vsftpd*.rpm 2。打开VSFTP服务器。[root@linuxsir001 root]# ntsysv把vsftpd服务器打开,也就是在运行 ntsysv命令后,把vsftpd服务选中。
vsftpd 3。运行/etc/init.d/vsftpd start[root@linuxsir001 root]# /etc/init.d/vsftpd start
为 vsftpd 启动 vsftpd: [ 确定 ]
[root@linuxsir001 root]#4。配制VSFTP,FVSFTP的运行有两种模式,一种是stardard "initd模式,另外一种是xinetd模式,上面我们所说的就是stardard initd运行模式。两种模式运行机制不是相同的,stardard initd模式,适合专业FTP,且FTP总是一直有人访问,占用资源也是比较大,如果您的FTP总是有人访问和登入。就要用这种模式。如果您的FTP访问人数比较小,建议您用xinetd模式。xinetd模式,是当用户请求时,vsftpd才会启动。不同的环境,当然得用不同的启动模式。如果想了解更多的,请在本帖后面跟帖,我会慢慢补充xinetd模式,以及虚拟用户如何设置方面的问题。
1]我们主要把vsftp的配制文件改一下就行了。配制文件在/etc/vsftpd/vsftpd.conf,用您喜欢的编辑器打开。请参考下面的配制文件。
# Example config file /etc/vsftpd.conf
#
# The default compiled in settings are very paranoid. This sample file
# loosens things up a bit, to make the ftp daemon more usable.
#
# Allow anonymous FTP?
anonymous_enable=YES
#
# Uncomment this to allow local users to log in.
local_enable=YES
#
# Uncomment this to enable any form of FTP write command.
write_enable=YES
#
# Default umask for local users is 077. You may wish to change this to 022,
# if your users expect that (022 is used by most other ftpd's)
local_umask=022
#
# Uncomment this to allow the anonymous FTP user to upload files. This only
# has an effect if the above global write enable is activated. Also, you will
# obviously need to create a directory writable by the FTP user.
#anon_upload_enable=YES
#
# Uncomment this if you want the anonymous FTP user to be able to create
# new directories.
#anon_mkdir_write_enable=YES
#
# Activate directory messages - messages given to remote users when they
# go into a certain directory.
dirmessage_enable=YES
#
# Activate logging of uploads/downloads.
xferlog_enable=YES
#
# Make sure PORT transfer connections originate from port 20 (ftp-data).
connect_from_port_20=YES
#
# If you want, you can arrange for uploaded anonymous files to be owned by
# a different user. Note! Using "root" for uploaded files is not
# recommended!
#chown_uploads=YES
#chown_username=whoever
#
# You may override where the log file goes if you like. The default is shown
# below.
#xferlog_file=/var/log/vsftpd.log
#
# If you want, you can have your log file in standard ftpd xferlog format
xferlog_std_format=YES
#
# You may change the default value for timing out an idle session.
#idle_session_timeout=600
#
# You may change the default value for timing out a data connection.
#data_connection_timeout=120
#
# It is recommended that you define on your system a unique user which the
# ftp server can use as a totally isolated and unprivileged user.
#nopriv_user=ftpsecure
#
# Enable this and the server will recognise asynchronous ABOR requests. Not
# recommended for security (the code is non-trivial). Not enabling it,
# however, may confuse older FTP clients.
#async_abor_enable=YES
#
# By default the server will pretend to allow ASCII mode but in fact ignore
# the request. Turn on the below options to have the server actually do ASCII
# mangling on files when in ASCII mode.
# Beware that turning on ascii_download_enable enables malicious remote parties
# to consume your I/O resources, by issuing the command "SIZE /big/file" in
# ASCII mode.
# These ASCII options are split into upload and download because you may wish
# to enable ASCII uploads (to prevent uploaded scripts etc. from breaking),
# without the DoS risk of SIZE and ASCII downloads. ASCII mangling should be
# on the client anyway..
#ascii_upload_enable=YES
#ascii_download_enable=YES
#
# You may fully customise the login banner string:
#ftpd_banner=Welcome to blah FTP service.
#
# You may specify a file of disallowed anonymous e-mail addresses. Apparently
# useful for combatting certain DoS attacks.
#deny_email_enable=YES
# (default follows)
#banned_email_file=/etc/vsftpd.banned_emails
#
# You may specify an explicit list of local users to chroot() to their home
# directory. If chroot_local_user is YES, then this list becomes a list of
# users to NOT chroot().
#chroot_list_enable=YES
# (default follows)
#chroot_list_file=/etc/vsftpd.chroot_list
#
# You may activate the "-R" option to the builtin ls. This is disabled by
# default to avoid remote users being able to cause excessive I/O on large
# sites. However, some broken FTP clients such as "ncftp" and "mirror" assume
# the presence of the "-R" option, so there is a strong case for enabling it.
#ls_recurse_enable=YESpam_service_name=vsftpd
userlist_enable=YES
#enable for standalone mode
listen=YES
tcp_wrappers=YES2]更改完配制文件后,我们可以用下面的命令来重启VSFTPD服务器[root@linuxsir001 root]# /etc/init.d/vsftpd restart
关闭 vsftpd: [ 确定 ]
为 vsftpd 启动 vsftpd: [ 确定 ]
[root@linuxsir001 root]#3]以匿名方式来访问测试,在text模式下:注意:在text模式下,要用用户名ftp,密码ftp来访问,这才是在text中匿名访问FTP。看如下的操作:[root@linuxsir001 root]# ftp 192.168.0.1
Connected to 192.168.0.1.
220 (vsFTPd 1.1.3)
530 Please login with USER and PASS.
530 Please login with USER and PASS.
KERBEROS_V4 rejected as an authentication type
Name (192.168.0.1:root): ftp 这里写上ftp
331 Please specify the password.
Password:[这里添写ftp的密码],匿名登入密码也是ftp
230 Login successful. Have fun.
Remote system type is UNIX.
Using binary mode to transfer files.
ftp> ls
227 Entering Passive Mode (192,168,0,1,137,151)
150 Here comes the directory listing.
drwxr-xr-x 6 0 0 4096 May 25 13:54 RedHat90
drwxr-xr-x 2 0 0 4096 Feb 28 19:21 pub
226 Directory send OK.
ftp>
那匿名用户所访问的是哪个目录?是/var/ftp这个目录出现问题的解决:有时出错,是因为没有ftp和nobody用户,所以要在系统中添加这两个用户,一般的情况下,这两个用户在系统中是存在的。看下面的操作。
[root@linuxsir001 root]# adduser ftp
adduser: user ftp exists
[root@linuxsir001 root]# adduser nobody
adduser: user nobody exists从上面的操作中可知ftp和nobody用户是存在的,所以没有必要添加ftp和nobody用户了。如果不存在,一定要添加这两个用户,否则会出现匿名用户不能访问的情况。4]如果要以系统中存在的普通用户登入FTP,也没有什么可以设置的,添加一个用户就行。比如我要添加beinan这个用户,就要用下面的办法[root@linuxsir001 root]# adduser beinan
[root@linuxsir001 root]# passwd beinan
Changing password for user beinan.
New password:
BAD PASSWORD: it does not contain enough DIFFERENT characters
Retype new password:
passwd: all authentication tokens updated successfully.
[root@linuxsir001 root]#这样的话,就在/home目录中出现一个beinan的用户目录:如下:[root@linuxsir001 root]# ls /home/
beinan
如果我们想让beinan这个用户作为虚拟用户,也就是说,beinan这个用户是不能登入系统的,只能是登入FTP。 那这样的用户应该如何添加呢??[root@linuxsir001 backupNow]# adduser -g ftp -s /sbin/nologin beinan
[root@linuxsir001 backupNow]# passwd beinan
Changing password for user beinan.
New password:
Retype new password:
passwd: all authentication tokens updated successfully.
[root@linuxsir001 backupNow]#注:这仅仅是VSFTP添加虚拟用户的一个方法,还有更好的办法需要我们去学习!另外的办法也在测试之中。严格上来说,这种办法不能算虚拟用户。还有另外的一个办法,就是通过pam认证,用db_load来添加用户,目前我也弄成功了,不过相对要复杂一点。正在测试之中。
如果我们想把用户目录定位到别的目录应该怎么办呢??这个也比较简单,看一下useradd就比较明白了。比如我想添加beinan这个用户,并把目录放在/opt目录中:如下操作:[root@linuxsir001 root]# adduser -d /opt/beinan beinan
[root@linuxsir001 root]# passwd beinan
Changing password for user beinan.
New password:
Retype new password:
passwd: all authentication tokens updated successfully.如果是添加虚拟用户,也就是不让用户登入系统,只能登入FTP的用户。如果我们想把beinan这个用户目录定位在/opt/beinan这个目录中,根据上面的方法。我们应该如下操作
[root@linuxsir001 backupNow]# adduser -d /opt/beinan -g ftp -s /sbin/nologin beinan
[root@linuxsir001 backupNow]# passwd beinan
Changing password for user beinan.
New password:
Retype new password:
passwd: all authentication tokens updated successfully.
[root@linuxsir001 backupNow]#看一下是不是已经成功添加到了beinan这个用户,并把beinan的家目录放在了/opt目录中呢??[root@linuxsir001 root]# ls /opt/
beinan证明已经成功。我们可以在text模式下以beinan用户登入,然后来访问ftp。[root@linuxsir001 root]# ftp 192.168.0.1
Connected to 192.168.0.1.
220 (vsFTPd 1.1.3)
530 Please login with USER and PASS.
530 Please login with USER and PASS.
KERBEROS_V4 rejected as an authentication type
Name (192.168.0.1:root): beinan
331 Please specify the password.
Password:
230 Login successful. Have fun.
Remote system type is UNIX.
Using binary mode to transfer files.
ftp>是不是成功了???如何把用户限制在家目录中呢??我们要自己建一个文件,在/etc目录中
#touch /etc/vsftpd.chroot_list
以beinan这个用户为例在vsftpd.chroot_list这个文件中,把beinan添上去就行。然后改/etc/vsftpd/vsftpd.conf文件,找如下的两行#chroot_list_enable=YES
#chroot_list_file=/etc/vsftpd.chroot_list把前面的#号去掉,也就是这样的
chroot_list_enable=YES
chroot_list_file=/etc/vsftpd.chroot_list如果没有这样的两行,就可以自己添加上去也是一样的。设置好后,重新vsFTPD服务器。[root@linuxsir001 root]# /etc/init.d/vsftpd restart
关闭 vsftpd: [ 确定 ]
为 vsftpd 启动 vsftpd: [ 确定 ]
[root@linuxsir001 root]#
我们也可以用gftp来访问beinan用户,并上传相应的东西,所传上的东西就放在beinan用户所在的家目录中,普通用户的家目录在哪里,写您所用的添加用户的方法有关。我在前面已经说了两种办法,一种是默认的添加方法,就是放在/home目录中。在本例中,我是采用默认的添加用户的方法。也就是不特别指定用户用户,这样的话,用户目录就在/home目录中。比如用beinan登入FTP时,访问的就是/home/beinan这个目录。让传的东西也在这个目录中。那匿名用户所访问的是哪个目录呢???应该是:/var/ftp这个目录
5]访问ftp的几种方法第一种方法就是text访问,也就是用ftp命令来访问。这个前面已经说过了。第二种方法是以客户端FTP软件来访问,在linux中有gftp。在本例中,我的FTP地址是通过局域网访问的。地址栏中,添上192.168.0.1,端口是21,用户名和密码的添写,如果您是用匿名登入,请不要添写用户名和密码。如果用普通用户登入,这个是必须要用用户名和密码的。第三种办法是和浏览器访问:如果匿名登入,就直接用下面的方法:
ftp://192.168.0.1
如果是用户登入方式,应该是
ftp://beinan@192.168.0.1本文来自: IXPUB技术社区(www.ixpub.net) 详细出处参考:http://www.ixpub.net/thread-392054-1-1.html
如何在装有REDHAT系统的电脑上,在另一台电脑上从装有Redhatd 电脑上下载东西下来
腾讯宣布将停止在装有360的电脑上运行QQ
腾讯宣布将停止在装有360的电脑上运行QQ
腾讯宣布将停止在装有360的电脑上运行QQ
装有360软件的电脑上停止运行QQ软件
装有360安全软件照样上QQ的方法 电脑网络 电脑网络 忙里偷闲网
装有360安全软件照样上QQ的方法 电脑网络 电脑网络 忙里偷闲网
如何在电脑上录制歌曲2
如何在电脑上录制歌曲
在电脑上如何录制歌曲
在电脑上如何录制歌曲
如何在电脑上录自已唱的歌
如何连接电脑在电视上播放
如何连接电脑在电视上播放
在电脑上删除蚊子
在你的电脑上弹钢琴
怕笑死在电脑上的莫进来
在电脑上写作的必工具
在电脑上安装新的字体
如何在电脑上安装USB蓝牙模块
王安电脑失败在家族观念上
电脑上的快捷键
史上的电脑
电脑上的跳线