解决Virtual pc/windows CE emulator警告问题
来源:百度文库 编辑:神马文学网 时间:2024/06/12 03:23:52
开机进入桌面和往常一样弹出了一开一度的,
停用的设备或应用程序
“Virtual pc/windows CE emulator”会造成windows不稳定。
Windows使这些驱动程序无法加载。
或者
Devices or applications disabled
'Virtual PC/Windows CE Emulator' will cause Windows to become unstable. Windows has prevented these drivers from loading.
警告信息,再弹出一个,
Emulator for Windows CE
One or more files from the Emulator for Windows CE installation is missing. Please reinstall Emulator for Windows CE and try again.
一直没管它,可是每次都这样看起来很浪费时间,虽然凌晨了也下决心花点时间解决这个问题,我认为所掌握的技术多少不是最重要的,最重要的是面对问题、分析问题、解决问题的能力。
听着黄磊的我想我是海.mp3
Start!
把问题解决。My System is WindowsXP sp2 English Pro Edi的所以比较符合微软的RESOLUTION(英文应对方法)。
下面给中文版用户做一下翻译,不是科班出身翻译错了告诉一声。
警告总是让人担心的,先来搞清楚为什么:
将,
CAUSE
This problem occurs in Windows XP and in Windows XP Service Pack 1 (SP1) because the Windows CE emulators do not work correctly if Physical Address Extension (PAE) mode is enabled. This problem occurs with Windows XP SP2 because Windows XP SP2 does not allow the Virtual PC/Windows CE Emulator driver (VPCAppSv.sys) to load when hardware-based DEP is enabled. This is part of the Windows XP SP2 Driver Protection feature.
翻译如下 :
原因
这个问题发生在Windows XP 和 Windows XP Service Pack 1 (SP1) Windows CE emulators不能工作正确,是因为物理地址扩展 (PAE)模式没有激活。这个问题发生在Windows XP SP2是因为当基于硬件的 DEP 是激活的时候Windows XP SP2不允许 虚拟 PC/Windows CE Emulator 设备驱动(VPCAppSv.sys)加载。这是Windows XP SP2驱动程序保护功能的一部分。
微软官网如是说,下面英汉对照:
1. Click Start, click Run, type sysdm.cpl, and then click OK.
点击开始,点击运行,输入sysdm.cpl,而后点击OK。
2. In the System Properties dialog box, click the Advanced tab.
在系统性能对话框,点击高级选片。
3. Under Start and Recovery, click Settings.
在系统和恢复下,点击设置。
4. In the Startup and Recovery dialog box, click Edit.
在启动和恢复对话框,单击编辑。
5. Disable PAE mode by removing the /pae option if it exists.
让PAE样式失效删除/pae 项如果有的话。
6. If you are using Windows XP SP2, remove the /noexecute option if it exists, and then add the /execute option.
如果你使用着Windows XP SP2,移除/noexecute如果存在的话,其次添加 /execute项。
(我不太理解我是直接将/noexecute换成/execute解决了问题)
7. On the File menu, click Save.
在文件菜单,点击保存。
8. To exit Notepad, click Exit on the File menu.
退出记事本,在文件选项菜单中点击退出。
9. To close System Properties, click OK two times.
关闭系统性能,点击两个OK。
10. Restart your computer.
重启计算机。
以上翻译了微软官方的对策:
http://support.microsoft.com/kb/891667/en-us
停用的设备或应用程序
“Virtual pc/windows CE emulator”会造成windows不稳定。
Windows使这些驱动程序无法加载。
或者
Devices or applications disabled
'Virtual PC/Windows CE Emulator' will cause Windows to become unstable. Windows has prevented these drivers from loading.
警告信息,再弹出一个,
Emulator for Windows CE
One or more files from the Emulator for Windows CE installation is missing. Please reinstall Emulator for Windows CE and try again.
一直没管它,可是每次都这样看起来很浪费时间,虽然凌晨了也下决心花点时间解决这个问题,我认为所掌握的技术多少不是最重要的,最重要的是面对问题、分析问题、解决问题的能力。
听着黄磊的我想我是海.mp3
Start!
把问题解决。My System is WindowsXP sp2 English Pro Edi的所以比较符合微软的RESOLUTION(英文应对方法)。
下面给中文版用户做一下翻译,不是科班出身翻译错了告诉一声。
警告总是让人担心的,先来搞清楚为什么:
将,
CAUSE
This problem occurs in Windows XP and in Windows XP Service Pack 1 (SP1) because the Windows CE emulators do not work correctly if Physical Address Extension (PAE) mode is enabled. This problem occurs with Windows XP SP2 because Windows XP SP2 does not allow the Virtual PC/Windows CE Emulator driver (VPCAppSv.sys) to load when hardware-based DEP is enabled. This is part of the Windows XP SP2 Driver Protection feature.
翻译如下 :
原因
这个问题发生在Windows XP 和 Windows XP Service Pack 1 (SP1) Windows CE emulators不能工作正确,是因为物理地址扩展 (PAE)模式没有激活。这个问题发生在Windows XP SP2是因为当基于硬件的 DEP 是激活的时候Windows XP SP2不允许 虚拟 PC/Windows CE Emulator 设备驱动(VPCAppSv.sys)加载。这是Windows XP SP2驱动程序保护功能的一部分。
微软官网如是说,下面英汉对照:
1. Click Start, click Run, type sysdm.cpl, and then click OK.
点击开始,点击运行,输入sysdm.cpl,而后点击OK。
2. In the System Properties dialog box, click the Advanced tab.
在系统性能对话框,点击高级选片。
3. Under Start and Recovery, click Settings.
在系统和恢复下,点击设置。
4. In the Startup and Recovery dialog box, click Edit.
在启动和恢复对话框,单击编辑。
5. Disable PAE mode by removing the /pae option if it exists.
让PAE样式失效删除/pae 项如果有的话。
6. If you are using Windows XP SP2, remove the /noexecute option if it exists, and then add the /execute option.
如果你使用着Windows XP SP2,移除/noexecute如果存在的话,其次添加 /execute项。
(我不太理解我是直接将/noexecute换成/execute解决了问题)
7. On the File menu, click Save.
在文件菜单,点击保存。
8. To exit Notepad, click Exit on the File menu.
退出记事本,在文件选项菜单中点击退出。
9. To close System Properties, click OK two times.
关闭系统性能,点击两个OK。
10. Restart your computer.
重启计算机。
以上翻译了微软官方的对策:
http://support.microsoft.com/kb/891667/en-us
解决Virtual pc/windows CE emulator警告问题
解决Virtual pc/windows CE emulator警告问题
Windows CE 4.x Emulator winxp&sp2问题,解决方法
Windows CE应用软件
梦山资料馆: Oracle - 关于virtual PC下装LINUX的问题
Windows Mobile 5.0 Pocket PC软件专区 - X50 WM5.0问题bug完全解决方案-解决现今X50 WM5.0系统目前所有bug包括filesys问题
无须重装搞定Windows全部问题(PC新手必看)
Windows CE的学习路线
Windows CE的学习路线
配置Windows CE下浏览器
Virtual PC安装Vista全攻略
虚拟机软件Virtual PC 2007图片教程
Virtual?PC安装使用完全指南
虚拟机Microsoft Virtual PC 2007安装教程
虚拟机Microsoft Virtual PC 2007安装教程
轻松解决Windows虚拟内存不够的问题
轻松解决Windows虚拟内存不够的问题
轻松解决Windows虚拟内存不够的问题
解决Windows虚拟内存不足的问题
轻松解决Windows系统棘手问题
妙用Windows安全模式解决诸多问题
解决windows installer服务不能访问的问题 - Windows Vista ...
Windows Mobile 6 SDK 中的 Cellular Emulator - 黎...
Windows CE开发常见问题解答(转载)