rabbitmqctl(1) manual page
This is the manual page forrabbitmqctl(1)
.
See alist of all manual pages.
For more general documentation, please see theadministrator'sguide.
Table of Contents
- Name
- Synopsis
- Description
- Options
- Commands
- Application and Cluster Management
- Cluster management
- Closing individual connections
- User management
- Access control
- Server Status
- Application and Cluster Management
Name
rabbitmqctl — command line tool for managing a RabbitMQ broker
Synopsis
rabbitmqctl
[-n node
] [-q] {command
} [command options
...]
Description
RabbitMQ is an implementation of AMQP, the emerging standard for high performance enterprise messaging. The RabbitMQ server is a robust and scalable implementation of an AMQP broker.
rabbitmqctl is a command line tool for managing a RabbitMQ broker. It performs all actions by connecting to one of the broker's nodes.
Options
-
[-n
node
] -
Default node is "rabbit@server", where server is the local host. On a host named "server.example.com", the node name of the RabbitMQ Erlang node will usually be rabbit@server (unless RABBITMQ_NODENAME has been set to some non-default value at broker startup time). The output of hostname -s is usually the correct suffix to use after the "@" sign. See rabbitmq-server(1) for details of configuring the RabbitMQ broker.
-
[-q]
-
Quiet output mode is selected with the "-q" flag. Informational messages are suppressed when quiet mode is in effect.
Flags must precede all other parameters to rabbitmqctl.
Commands
Application and Cluster Management
-
stop
-
Stops the Erlang node on which RabbitMQ is running. To restart the node follow the instructions for Running the Server in the installation guide.
For example:
rabbitmqctl stop
This command instructs the RabbitMQ node to terminate.
-
stop_app
-
Stops the RabbitMQ application, leaving the Erlang node running.
This command is typically run prior to performing other management actions that require the RabbitMQ application to be stopped, e.g. reset.
For example:
rabbitmqctl stop_app
This command instructs the RabbitMQ node to stop the RabbitMQ application.
-
start_app
-
Starts the RabbitMQ application.
This command is typically run after performing other management actions that required the RabbitMQ application to be stopped, e.g. reset.
For example:
rabbitmqctl start_app
This command instructs the RabbitMQ node to start the RabbitMQ application.
-
status
-
Displays various information about the RabbitMQ broker, such as whether the RabbitMQ application on the current node, its version number, what nodes are part of the broker, which of these are running.
For example:
rabbitmqctl status
This command displays information about the RabbitMQ broker.
-
reset
-
Return a RabbitMQ node to its virgin state.
Removes the node from any cluster it belongs to, removes all data from the management database, such as configured users and vhosts, and deletes all persistent messages.
For reset and force_reset to succeed the RabbitMQ application must have been stopped, e.g. with stop_app.
For example:
rabbitmqctl reset
This command resets the RabbitMQ node.
-
force_reset
-
Forcefully return a RabbitMQ node to its virgin state.
The force_reset command differs from reset in that it resets the node unconditionally, regardless of the current management database state and cluster configuration. It should only be used as a last resort if the database or cluster configuration has been corrupted.
For reset and force_reset to succeed the RabbitMQ application must have been stopped, e.g. with stop_app.
For example:
rabbitmqctl force_reset
This command resets the RabbitMQ node.
-
rotate_logs
{suffix
} -
Instruct the RabbitMQ node to rotate the log files.
The RabbitMQ broker will attempt to append the current contents of the log file to the file with name composed of the original name and the suffix. It will create a new file if such a file does not already exist. When no
suffix
is specified, the empty log file is simply created at the original location; no rotation takes place.When an error occurs while appending the contents of the old log file, the operation behaves in the same way as if no
suffix
was specified.This command might be helpful when you are e.g. writing your own logrotate script and you do not want to restart the RabbitMQ node.
For example:
rabbitmqctl rotate_logs .1
This command instructs the RabbitMQ node to append the current content of the log files to the files with names consisting of the original logs' names and ".1" suffix, e.g. rabbit.log.1. Finally, the old log files are reopened.
Cluster management
-
cluster
{clusternode
...} -
- clusternode
-
Subset of the nodes of the cluster to which this node should be connected.
Instruct the node to become member of a cluster with the specified nodes.
Cluster nodes can be of two types: disk or ram. Disk nodes replicate data in ram and on disk, thus providing redundancy in the event of node failure and recovery from global events such as power failure across all nodes. Ram nodes replicate data in ram only and are mainly used for scalability. A cluster must always have at least one disk node.
If the current node is to become a disk node it needs to appear in the cluster node list. Otherwise it becomes a ram node. If the node list is empty or only contains the current node then the node becomes a standalone, i.e. non-clustered, (disk) node.
After executing the cluster command, whenever the RabbitMQ application is started on the current node it will attempt to connect to the specified nodes, thus becoming an active node in the cluster comprising those nodes (and possibly others).
The list of nodes does not have to contain all the cluster's nodes; a subset is sufficient. Also, clustering generally succeeds as long as at least one of the specified nodes is active. Hence adjustments to the list are only necessary if the cluster configuration is to be altered radically.
For this command to succeed the RabbitMQ application must have been stopped, e.g. with stop_app. Furthermore, turning a standalone node into a clustered node requires the node be reset first, in order to avoid accidental destruction of data with the cluster command.
For more details see the clustering guide.
For example:
rabbitmqctl cluster rabbit@tanto hare@elena
This command instructs the RabbitMQ node to join the cluster with nodes rabbit@tanto and hare@elena. If the node is one of these then it becomes a disk node, otherwise a ram node.
Closing individual connections
-
close_connection
{connectionpid
} {explanation
} -
- connectionpid
-
Id of the Erlang process associated with the connection to close.
- explanation
-
Explanation string.
Instruct the broker to close the connection associated with the Erlang process id
connectionpid
(see also the list_connections command), passing theexplanation
string to the connected client as part of the AMQP connection shutdown protocol.For example:
rabbitmqctl close_connection "
" "go away" This command instructs the RabbitMQ broker to close the connection associated with the Erlang process id
, passing the explanation go away to the connected client.
User management
-
add_user
{username
} {password
} -
- username
-
The name of the user to create.
- password
-
The password the created user will use to log in to the broker.
For example:
rabbitmqctl add_user tonyg changeit
This command instructs the RabbitMQ broker to create a user named tonyg with (initial) password changeit.
-
delete_user
{username
} -
- username
-
The name of the user to delete.
For example:
rabbitmqctl delete_user tonyg
This command instructs the RabbitMQ broker to delete the user named tonyg.
-
change_password
{username
} {newpassword
} -
- username
-
The name of the user whose password is to be changed.
- newpassword
-
The new password for the user.
For example:
rabbitmqctl change_password tonyg newpass
This command instructs the RabbitMQ broker to change the password for the user named tonyg to newpass.
-
list_users
-
Lists users
For example:
rabbitmqctl list_users
This command instructs the RabbitMQ broker to list all users.
Access control
-
add_vhost
{vhostpath
} -
- vhostpath
-
The name of the virtual host entry to create.
Creates a virtual host.
For example:
rabbitmqctl add_vhost test
This command instructs the RabbitMQ broker to create a new virtual host called test.
-
delete_vhost
{vhostpath
} -
- vhostpath
-
The name of the virtual host entry to delete.
Deletes a virtual host.
Deleting a virtual host deletes all its exchanges, queues, user mappings and associated permissions.
For example:
rabbitmqctl delete_vhost test
This command instructs the RabbitMQ broker to delete the virtual host called test.
-
list_vhosts
-
Lists virtual hosts.
For example:
rabbitmqctl list_vhosts
This command instructs the RabbitMQ broker to list all virtual hosts.
-
set_permissions
[-pvhostpath
] {username
} {configure
} {write
} {read
} -
- vhostpath
-
The name of the virtual host to which to grant the user access, defaulting to /.
- username
-
The name of the user to grant access to the specified virtual host.
- configure
-
A regular expression matching resource names for which the user is granted configure permissions.
- write
-
A regular expression matching resource names for which the user is granted write permissions.
- read
-
A regular expression matching resource names for which the user is granted read permissions.
Sets user permissions.
For example:
rabbitmqctl set_permissions -p /myvhost tonyg "^tonyg-.*" ".*" ".*"
This command instructs the RabbitMQ broker to grant the user named tonyg access to the virtual host called /myvhost, with configure permissions on all resources whose names starts with "tonyg-", and write and read permissions on all resources.
-
clear_permissions
[-pvhostpath
] {username
} -
- vhostpath
-
The name of the virtual host to which to deny the user access, defaulting to /.
- username
-
The name of the user to deny access to the specified virtual host.
Sets user permissions.
For example:
rabbitmqctl clear_permissions -p /myvhost tonyg
This command instructs the RabbitMQ broker to deny the user named tonyg access to the virtual host called /myvhost.
-
list_permissions
[-pvhostpath
] -
- vhostpath
-
The name of the virtual host for which to list the users that have been granted access to it, and their permissions. Defaults to /.
Lists permissions in a virtual host.
For example:
rabbitmqctl list_permissions -p /myvhost
This command instructs the RabbitMQ broker to list all the users which have been granted access to the virtual host called /myvhost, and the permissions they have for operations on resources in that virtual host.
-
list_user_permissions
[-pvhostpath
] {username
} -
- username
-
The name of the user for which to list the permissions.
Lists user permissions.
For example:
rabbitmqctl list_user_permissions tonyg
This command instructs the RabbitMQ broker to list all the virtual hosts to which the user named tonyg has been granted access, and the permissions the user has for operations on resources in these virtual hosts.
Server Status
The server status queries interrogate the server and return a list of results with tab-delimited columns. Some queries (list_queues, list_exchanges, list_bindings, and list_consumers) accept an optional vhost parameter. This parameter, if present, must be specified immediately after the query.
The list_queues, list_exchanges and list_bindings commands accept an optional virtual host parameter for which to display results. The default value is "/".
-
list_queues
[-pvhostpath
] [queueinfoitem
...] -
Returns queue details. Queue details of the / virtual host are returned if the "-p" flag is absent. The "-p" flag can be used to override this default.
The queueinfoitem parameter is used to indicate which queue information items to include in the results. The column order in the results will match the order of the parameters. queueinfoitem can take any value from the list that follows:
- name
-
The name of the queue with non-ASCII characters URL-escaped.
- durable
-
Whether or not the queue survives server restarts.
- auto_delete
-
Whether the queue will be deleted automatically when no longer used.
- arguments
-
Queue arguments.
- pid
-
Id of the Erlang process associated with the queue.
- owner_pid
-
Id of the Erlang process representing the connection which is the exclusive owner of the queue. Empty if the queue is non-exclusive.
- exclusive_consumer_pid
-
Id of the Erlang process representing the channel of the exclusive consumer subscribed to this queue. Empty if there is no exclusive consumer.
- exclusive_consumer_tag
-
Consumer tag of the exclusive consumer subscribed to this queue. Empty if there is no exclusive consumer.
- messages_ready
-
Number of messages ready to be delivered to clients.
- messages_unacknowledged
-
Number of messages delivered to clients but not yet acknowledged.
- messages
-
Sum of ready and unacknowledged messages (queue depth).
- consumers
-
Number of consumers.
- memory
-
Bytes of memory consumed by the Erlang process associated with the queue, including stack, heap and internal structures.
If no queueinfoitems are specified then queue name and depth are displayed.
For example:
rabbitmqctl list_queues -p /myvhost messages consumers
This command displays the depth and number of consumers for each queue of the virtual host named /myvhost.
-
list_exchanges
[-pvhostpath
] [exchangeinfoitem
...] -
Returns exchange details. Exchange details of the / virtual host are returned if the "-p" flag is absent. The "-p" flag can be used to override this default.
The exchangeinfoitem parameter is used to indicate which exchange information items to include in the results. The column order in the results will match the order of the parameters. exchangeinfoitem can take any value from the list that follows:
- name
-
The name of the exchange with non-ASCII characters URL-escaped.
- type
-
The exchange type (one of [direct, topic, headers, fanout]).
- durable
-
Whether or not the exchange survives server restarts.
- auto_delete
-
Whether the exchange will be deleted automatically when no longer used.
- arguments
-
Exchange arguments.
If no exchangeinfoitems are specified then exchange name and type are displayed.
For example:
rabbitmqctl list_exchanges -p /myvhost name type
This command displays the name and type for each exchange of the virtual host named /myvhost.
-
list_bindings
[-pvhostpath
] -
By default the bindings for the / virtual host are returned. The "-p" flag can be used to override this default. Each result row will contain an exchange name, queue name, routing key and binding arguments, in that order. Non-ASCII characters will be URL-encoded.
The output format for "list_bindings" is a list of rows containing exchange name, queue name, routing key and arguments, in that order.
-
list_connections
[connectioninfoitem
...] -
Returns TCP/IP connection statistics.
The connectioninfoitem parameter is used to indicate which connection information items to include in the results. The column order in the results will match the order of the parameters. connectioninfoitem can take any value from the list that follows:
- pid
-
Id of the Erlang process associated with the connection.
- address
-
Server IP address.
- port
-
Server port.
- peer_address
-
Peer address.
- peer_port
-
Peer port.
- state
-
Connection state (one of [starting, tuning, opening, running, closing, closed]).
- channels
-
Number of channels using the connection.
- user
-
Username associated with the connection.
- vhost
-
Virtual host name with non-ASCII characters URL-escaped.
- timeout
-
Connection timeout.
- frame_max
-
Maximum frame size (bytes).
- client_properties
-
Informational properties transmitted by the client during connection establishment.
- recv_oct
-
Octets received.
- recv_cnt
-
Packets received.
- send_oct
-
Octets send.
- send_cnt
-
Packets sent.
- send_pend
-
Send queue size.
If no connectioninfoitems are specified then user, peer address, peer port and connection state are displayed.
For example:
rabbitmqctl list_connections send_pend server_port
This command displays the send queue size and server port for each connection.
-
list_channels
[channelinfoitem
...] -
Returns information on all current channels, the logical containers executing most AMQP commands. This includes channels that are part of ordinary AMQP connections, and channels created by various plug-ins and other extensions.
The channelinfoitem parameter is used to indicate which channel information items to include in the results. The column order in the results will match the order of the parameters. channelinfoitem can take any value from the list that follows:
- pid
-
Id of the Erlang process associated with the connection.
- connection
-
Id of the Erlang process associated with the connection to which the channel belongs.
- number
-
The number of the channel, which uniquely identifies it within a connection.
- user
-
Username associated with the channel.
- vhost
-
Virtual host in which the channel operates.
- transactional
-
True if the channel is in transactional mode, false otherwise.
- consumer_count
-
Number of logical AMQP consumers retrieving messages via the channel.
- messages_unacknowledged
-
Number of messages delivered via this channel but not yet acknowledged.
- acks_uncommitted
-
Number of acknowledgements received in an as yet uncommitted transaction.
- prefetch_count
-
QoS prefetch count limit in force, 0 if unlimited.
If no channelinfoitems are specified then pid, user, transactional, consumer_count, and messages_unacknowledged are assumed.
For example:
rabbitmqctl list_channels connection messages_unacknowledged
This command displays the connection process and count of unacknowledged messages for each channel.
-
list_consumers
-
List consumers, i.e. subscriptions to a queue's message stream. Each line printed shows, separated by tab characters, the name of the queue subscribed to, the id of the channel process via which the subscription was created and is managed, the consumer tag which uniquely identifies the subscription within a channel, and a boolean indicating whether acknowledgements are expected for messages delivered to this consumer.
The output format for "list_consumers" is a list of rows containing, in order, the queue name, channel process id, consumer tag, and a boolean indicating whether acknowledgements are expected from the consumer.
About us RabbitMQ™ is a Trademark of Rabbit Technologies Ltd.